| If you wish to be added to our e-mail list, and receive fortnightly updates click here | |
5th December 2005 |
Micromech for low cost travel! Carriages at Christmas….. |
 |
Short journeys are often as expensive as long ones and this applies equally to positioning or processing product. Our answer to cut your travel costs is the MM3 compact gantry unit, a low priced XYZ system. more... |
2nd December 2005 |
Xmas Opening Hours |
 |
Micromech's Christmas Opening Hours.more... |
28th November 2005 |
Micromech for low cost travel! Autumn special offer…. |
 |
You need to go some distance but normally your budget wont stretch to it, then the single axis ZF1 open belt feed actuator is the answer. With a useful travel of 2 metres this makes it ideal for the cost conscientious engineer making ends meet.more... |
8th November 2005 |
Are you working in a vacuum and losing your drive? Our ‘V’ stepping motors will get you running again. |
 |
These rugged motors have been vacuum prepared for down to 10-6 Torr making them suitable for research, laboratory and autoclave applications. Being combined with the extended temperature range in excess of 100 Deg. C and special grease treatment in the bearings, these motors are therefore ideal for ‘in-vac’ working.more... |
26th October 2005 |
Bonsai Man Branches Out |
 |
Regular readers of our web news items will recall in one of our ‘meet the team’ series we featured our Sales Manager ‘green fingers’ Darren Mackay who revealed his expertise in growing bonsai trees. Now after 9 years at Micromech he has decided that it was time for a change, and its not just a little one! more... |
24th October 2005 |
Micromech for low cost travel! Autumn special offer…. |
 |
The Blue Line series 1 is a belt driven linear actuator with a travel of 950mm and is an absolute bargain. Its price makes it suitable for almost any environment but is particularly attractive at the moment for the financially hard pressed educational establishments. more... |
10th October 2005 |
The PMAC2-PC/104 is well positioned at the top of the motion control class |
 |
The new PMAC2-PC/104 from Micromech Systems has been designed to deliver motion control for mid- to high-volume multi-axis motion control systems that demand a cost-effective and compact, yet flexible and reliable solution. more... |
26th September 2005 |
Want to try out stepper motor technology but not sure what you need? |
 |
Well, Micromech have made it simple by introducing a very low cost stepper motor evaluation kit. more... |
12th September 2005 |
Micromech for low cost travel! End of season offer… |
 |
This is an X Y axis arrangement using the LF5 + LF6 actuators that are suitable for everyday use in almost any workshop or laboratory environment. more... |
30th August 2005 |
The new PowerRod family pushes the actuator boundaries further and at greater speeds |
 |
The latest PowerRod actuators the PRC from Micromech delivers the speed of a belt-drive system with the accuracy of a precision screw axis and the clean reliability of a linear motor. This additional range following the recent launch of the PRA actuators has the same familiar form factor, integral position feedback and large air gap that makes installation very simple. more... |
Copyright © 2011 Unimotion. All rights reserved.